Pentomag 5500:

Pentols one of the most advanced Magnesium additive is Pentomag 5500. It is a blend of Magnesium oxide slurry along with some powerful combustion enhancers and corrosion inhibitors.

Hot and Cold temperature corrosion is reduced along with some other mentioned advantages:

  • To clean the HFO system as from the point of injection
  • To keep the boiler High Temperature and Low Temperature sections free from deposits and corrosion
  • To increase the pH of the ash by greater than 3.5
  • To reduce exit gas temperature by 10ºC.
  • To reduce the NOx emissions by greater than 10%
  • To reduce the SO3 formation by more than 30%
  • To eliminate acid smut formation
  • Increasing Process optimization hence Lower Heavy Fuel consumption.

Pentomag 5625:

PENTOLS finest Product PentoMag 5625 is the Pentol’s most favorite Magnesium additive. It is a combination of magnesium carboxylate and MgO slurry, paired with some powerful combustion improvers. While this combination is slightly more expensive than pure slurry, its performance is outstanding. Hot and low temperature corrosion is reduced at an extremely low dosage rate. With PentoMag 5625, we reach the same performance on boilers as with pure magnesium carboxylate at fraction of its price.

Some of its Properties are:

  • To clean the HFO system as from the point of injection
  • To keep the boiler High Temperature and Low Temperature sections free from deposits and corrosion
  • To reduce the unburn carbon and thus the solid emission by more than 50%
  • To increase the pH of the ash by greater than 3.5
  • To reduce exit gas temperature by 20ºC.
  • To reduce the NOx emissions by greater than 20%
  • To reduce the SO3 formation by more than 50%
  • To eliminate acid smut formation
  • To reduce the Atomizing steam consumption
  • Increasing Process optimization hence Lower Heavy Fuel consumption

Pentomag 2000:

Pentol started the production of MgO slurries in 1972 and replaced the use of magnesium hydroxide in European power stations quickly, as the product is more cost efficient and requires a lower dosage rate than Magnesium hydroxide.

We are continuously updating the production process in order to produce a particle size that will protect both cold and hot part of the boiler while minimizing the white effect. MgO slurries contain the highest density of MgO per litre.

Pentomag 2015:

MgO slurries can be pure or mixed with combustion improvers. Pentomag 2015 is the finest product as it is mixed with combustion enhancers thus resulting in complete combustion and minimizing the white effect.

  • Prevents the formation of scales and corrosion in High temperature zones and combustion chambers through the formation of high melting point compounds which can be easily removed through the stack in dust form.
  • Reduction in nitrogen oxides (NOx) emissions by better combustion and thus low levels of excess air.
  • Reduction in solids emission.
  • Clean fuel oil pipe system.
  • The reduction in the exit gas temperature is advantageous since there is reduction in fuel consumption.